Voice, Text & 4G LTE Cell Phone Signal Booster for Large Buildings 25,000+ sq ft
- Boosts voice, text and 4G LTE signals for all North American cell carriers
- Reduces dropped & missed calls
- Increases signal strength & extends battery life for all cellular devices
- Supports 100+ simultaneous users
- Coverage for large buildings, 25,000+ Sq Ft
- Multiple kitting options provide the flexibility to customize installation for any building or floor plan
- SENTRY Remote Monitoring and Control System included
The SureCall Force5 cell phone signal booster is an alternative solution to a DAS at a fraction of the cost. Force5 increases signal strength for voice, text and 4G LTE on all North American cellular carriers, including AT&T, Verizon, Sprint and T-Mobile. Force5 is a complete enterprise solution designed for large buildings 25,000+ sq ft, supporting 100+ simultaneous users.
The Force5 booster features sturdy metal construction and an industry leading 3-year warranty. Optional 5-year extended warranty is also available. Force5 boosters include the SENTRY Remote Monitoring and Control System for optimizing when located off-site.
The kit comes with a choice of two outside antennas:
Omni Outdoor Antenna
Omni antennas receive and send signals in a 360º radius. They can receive signals from multiple cell towers and are best for boosting signal on many different carriers. They are excellent in most situations where the existing outside signal strength is moderate to strong. If the outside signal is weaker than that, you may need the directional yagi antenna instead. We have a guide to testing your outside signal strength here.
Yagi Outdoor Antenna
It is a directional antenna that can reach cell towers up to 30 miles away. It needs to be set up pointing in the direction of the cell tower, and because it is directional it will only pick up signal in that direction. We recommend it for situations where existing outside signal is weak, and you only want to boost coverage for one carrier (or if more than one carrier has a cell tower in one direction). If you need to boost signal coming from different directions, it is possible to set up more than one yagi antenna.
The kit also has a choice of two inside antennas:
It is a multi-band omni-directional plastic antenna with that broadcasts signals in all directions. It is designed for central locations with 360º coverage. The range of the antenna is dependent on three factors: 1) physical obstructions, 2) power generated by the booster and 3) reception from outside signal received and distributed by the outside antenna. Besides the antenna itself, parts include mounting equipment. It needs to be mounted to the ceiling for best results and you will need to run a cable to the back of the ceiling.
It is a directional antenna. Panel antennas allow optimum reception to targeted areas. It can be mounted to either the wall or ceiling.
|Uplink Frequency Range (MHz):||698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)|
|Downlink Frequency Range (MHz):||728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)|
|Supported Standards:||CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards|
|Input/Output Impedance:||50 Ohm|
|Maximum Gain:||Cellular – 65 dB / PCS – 72 dB / LTE(A) – 63.5 dB / LTE(V) – 64 dB / AWS – 71 dB|
|Noise Figure:||8 dB|
|AC Power Transmitter:||Input AC 110 V, 60 Hz / Output DC 19 V|
|Maximum Output Power:||1 Watt EIRP|
|RF Connectors:||N Female (both ends)|
|Dimensions:||12-1/2″ x 11″ x 3-1/2″|